Printable ModeApocalipsa 3:12
|
3:12 Pe cel ce va birui, il voi face un stalp in Templul Dumnezeului Meu, si nu va mai iesi afara din el. Voi scrie pe el Numele Dumnezeului Meu si numele cetatii Dumnezeului Meu, noul Ierusalim, care are sa se pogoare din cer de la Dumnezeul Meu, si Numele Meu cel nou. Un stalp in Templul. Un ,,stalp” metaforic ar fi o parte din ,,templul” metaforic. In Noul Testament cuvantul tradus ,,templu” (naos) se refera in general la partea interioara a sanctuarului, continand Locul Sfant si Locul Prea Sfant, nu la intregul complex al cladirilor ce alcatuiau templul din vechime. Ca atare, aceasta fagaduinta ar insemna ca cel biruitor va ocupa un loc permanent, important, chiar in prezenta lui Dumnezeu. Pentru cuvantul ,,stalp” folosit simbolic, vezi comentariul de la Galateni 2,9; 1 Timotei 3,15. Nu va mai iesi afara. Adica va ramane permanent acolo. Asadar ,,a iesi … afara” simbolizeaza a pleca din prezenta lui Dumnezeu, in mod deliberat, asa cum a facut Lucifer (PP 37). O astfel de fagaduinta poate fi data numai celor ce biruiesc mereu. In aceasta viata exista si posibilitatea de a ,,iesi afara”, dar in viata viitoare nimeni nu va mai alege sa iasa. Numele Dumnezeului Meu. Vezi comentariul de la Faptele Apostolilor 3,16; Apocalipsa 2,3; compara cu Apocalipsa 14,1; 22,4. Aici se continua simbolul introdus de cuvantul ,,stalp”, deci si aceste cuvinte trebuie luate simbolic. Asa cum ,,un nume” implica personalitate si caracter, aici este fagaduit faptul ca cei celor ce vor birui le va fi imprimat pentru totdeauna caracterul lui Dumnezeu; chipul Creatorului va fi pe deplin refacut in ei. Prin acest simbol se poate intelege si faptul ca sfintii biruitori vor fi deplin ai lui Dumnezeu, asa cum atesta Numele Sau, sau semnul Sau de proprietate, pus astfel asupra lor. Numele cetatii. Stalpul va avea inscriptionat pe el nu doar numele lui Dumnezeu, ci si numele noului Ierusalim. Acest lucru poate semnifica faptul ca cel biruitor va fi cetatean al noului Ierusalim si ca va avea dreptul sa locuiasca acolo (cap. 22,14). Noul Ierusalim. ,,Nou” nu in sensul de a fi un duplicat al cetatii literale cu acelasi nume, ci ca un contrast intre Ierusalimul ceresc si corespondentul sau pamantesc. Vechiul Ierusalimul trebuia sa devina metropola acestui pamant si sa ramana pe veci asa (vezi Vol. IV, pp. 29, 30), dar din pricina neindeplinirii sarcinii lui, rolul sau va fi acordat noului Ierusalim. Sintagma ,,noul Ierusalim” apare doar in Apocalipsa, dar gandul este anticipat in Galateni 4,26; Evrei 12,22. Pentru intelesul numelui Ierusalim, vezi comentariul de la Iosua 10,1. Are sa se pogoare. Vezi comentariul de la cap. 21,2. Numele Meu cel nou. Al treilea nume scris pe stalpul simbolic este cel al lui Hristos Insusi. Primirea de catre cel biruitor a caracterului divin, reprezentata de nume (vezi comentariul de la Faptele Apostolilor 3,16), este mijlocita de Hristos. Doar in virtutea faptului ca Dumnezeu a devenit om prin Isus Hristos, mai poate fi omul refacut dupa chipul si asemanarea lui Dumnezeu. Acest lucru se realizeaza prin darul vietii si al caracterului lui Hristos oferit credinciosului (vezi Galateni 2,20; DA 388). A primi numele lui Hristos inseamna de asemenea a confirma dreptul Sau de proprietate (vezi comentariul de la 2 Corinteni 1,22). |
Seek to any passage:
Search the text:
Special note for ANDROID SmartPhones
I recommend to download PhoneMe emulator for Android from here.
Especially I recommend phoneME Advanced - Foundation Profile + MIDP High Resolution b168 rev20547 from here, or from here.
Then you have to build your application, to transfer the .jar and .jad files on your mobile phone and run using this nice emulator.
1. Install a Zip Utility from Android Market.
2. Install a File Manager from Android Market.
3. Download and install PhoneMe, as mentioned above.
4. Build your application by using Download Multilingual Service or Dynamic Download (zip).
5. Copy the zip file into your Android Phone and unzip the content in a folder, and then write down the path to the unzipped files and the name of the .jad file.
6. Launch PhoneMe from your smartphone.
7. Inside PhoneMe, write to the main window the path and the name to the .jad file, above mentioned. Will look something like: file:///mnt/sd/download/BiblePhone.jad and then press enter.
8. The application will be installed, and next a hyperlink will be available below the above mentioned textbox. On this way you can install as many of MIDP application you like on your Android Phone.
How to install the application in Java Mobile enabled phones
It is possible now to have the Holy Scriptures on your mobile phone and to read
it wherever you are due to the Mobile Information Device Profile (MIDP)
technology in 1.0 and 2.0 versions, developed for Java applications.
A good advice is to try in the beginning the MIDP 1.0 / 128 Kbytes version, and
progressively to advance to MIDP 2.0 and larger volumes (512 Kbytes or more).
The application is available for MIDP 2.0, MIDP 1.0. You have only to select one
table on the field MIDP2.0 or MIDP1.0, according to the desired Bible version.
Then, you shall make a click on the JAR (Java Archive) file in order to obtain
the software to be installed on your mobile phone.
I recommend you to start with STARTER(MIDP1.0old) edition, then to continue with
INTERMEDIATE(MIDP1.0), and in the end, if the mobile phone supports this thing,
to try to install the ADVANCED (MIDP2.0) edition. Also, start with 128 kbytes
volumes, continue with 512 kbytes, and at the end try the version in one file.
There are cases where the mobile phone requires so called JAD (Java Descriptor)
files. These JAD files has to be
uploaded, on this case, together with the desired JAR files(s).
There are different methods to download the applications in your mobile phone as
follows:
1. Directly from Internet by using a WAP or GPRS connection
2. By using the infrared port of the mobile phone
3. By wireless Bluetooth access to the mobile phone
4. By cable link between PC ad mobile phone
5. If none from the above cases are valid
Next, we shall examine each case in order to have a successfully installation of
the software.
1. Directly from Internet by using a WAP or GPRS connection
If your have Internet access on your mobile phone (e.g. WAP or GPRS), it is
enough to access
https://biblephone.intercer.net/wap/ from the browser of the mobile phone,
and to access the desired Bible version, and then to make an option about
MIDP1.0 or MIDP2.0, and finally to select the desired module (e.g. one or more).
After the last selection, the desired version will be downloaded on your mobile
phone.
Many phones have only this option for installing JAVA appplications.
2. By using the infrared port of the mobile phone
Sometimes there is a need for a special uploader software for specific mobile
phones.
If you don't have access to Internet directly from your mobile phone, then you
shall have to pass to this step requiring to have infrared ports on your mobile
phone and on the computer.
a. On this case, you will download the application by using the computer from
the Internet (i.e. JAR files).
b. Once the application is downloaded (preferable on the desktop) you will have
to activate the infrared port on the mobile phone and align it with the infrared
port of the computer (preferable laptop).
c. Then a window will appear asking what file you want to send to the mobile
phone. Next, you will select the downloaded JAR file, and after OK, the mobile
phone will ask you if you want to load that file. You say YES and the
application will be downloaded on your mobile phone.
d. Probably, you will be asked by the mobile phone where you want to save it (e.g.
on the games or applications directories). After you made this selection, the
file will be ready to be loaded for run.
The displaying preference can be set inside the application in order to have
larger fonts, full screen display etc.
3. By wireless Bluetooth access to the mobile phone
Sometimes there is a need for a special uploader software for specific mobile
phones.
This situation is similar with the infrared case. You have only to activate
Bluetooth access on your mobile phone (check if exists) and on the computer (check
if exists).
4. By cable link between PC ad mobile phone
Sometimes there is a need for a special uploader software for specific
mobile phones.
On this case the steps are as follows:
a. On this case, you will download the application by using the computer from
the Internet (i.e. JAR files).
b. Once the application is downloaded (preferable on the desktop) you will have
to set up the wired connection between the mobile phone and the computer. Next,
you will start the synchronization / data transfer application and download the
JAR file in your mobile phone. Surely, you will have to consult the CD of your
mobile phone.
c. By this application you shall transfer into your mobile phone the JAR file in
the games or applications directories. Next, you will have to select for run the
JAR desired file.
5. If none from the above cases are valid
On this unhappy case, I recommend you to find a friend with a laptop having
infrared / Bluetooth capabilities, or to buy a data link cable, or to change
your current model of mobile phone.
Unfortunately, some models of mobile phones require only WAP/GPRS in order to
download and run Java applications.
Sometimes there is a need for a special uploader software for specific mobile
phones. Therefore check the documentation of them and also the page for specific
models.
Why so many versions? Simple, because not all the mobile phones support the
Bible in one file with MIDP 2.0 (the most advanced for the time being).
Multilingual Online Ebooks
It is possible now to have the inspirational ebooks on your browser and to read it allowing you to make comparisons between different translations or versions for a specific language. This occasion is unique, and you have only to browse to the desired author and book.
Select another version: