Printable ModeLevitic 16:32
|
16:32 Ispasirea sa fie facuta de preotul care a primit ungerea si care a fost inchinat in slujba Domnului, ca sa urmeze tatalui sau in slujba preotiei; sa se imbrace cu vesmintele de in, cu vesmintele sfintite. Care a fost inchinat. Preotia si slujba trebuiau sa continue dupa moartea lui Aaron. Atunci trebuia sa fie uns un alt preot si consacrat pentru slujba preoteasca, ca sa-si puna vesmintele de in si sa conduca slujba. Leviticul 16 este unul dintre marile capitole ale Bibliei. In el, Planul Mantuirii este descoperit minunat si impresionant, iar unele dintre lucrurile adanci ale lui Dumnezeu sunt descoperite in cele 34 de versete. Adancimea intelesului descoperit in ceremoniile descrise proclama un autor divin. Mintea este exercitata la maximum in incercarea de a intelege invataturile lui. Note suplimentare pentru capitolul 16 Pentru a putea intelege serviciile Zilei de Ispasire sunt necesare unele cunostinte despre cladirea in care avea loc ritualul de la Sanctuar, precum si oarecare cunostinte despre lucrurile din jurul lui. Pentru o descriere generala, vezi comentariul pentru Exod 26,1, iar pentru o descriere amanuntita, comentariile pentru Exod 25 la 40. Cortul Intalnirii care a fost construit la inceput de Moise era un cort cu peretii laterali de lemn (vezi Exod 26,15-26). Acoperisul consta din patru straturi de material, cel interior fiind din fire fine de in, celelalte din diferite feluri de piei (vezi Exod 26,1-14). Cortul insusi era aproximativ de 13,34 m lungime si aproximativ de 4,45 m latime, cu o ingradire exterioara numita curte, aproximativ de 52,4 m lungime si aproximativ de 26,2 m latime (vezi comentariul pentru Exod 27,9-18). Cladirea era impartita in doua despartituri, prima si cea mai mare numita Sfanta, si a doua Sfanta Sfintelor. Cele doua despartituri erau separate de o perdea bogata. Deoarece cladirea nu avea ferestre, lumina era obtinuta artificial prin sfesnicul cu sapte brate din prima despartitura, care dadea lumina suficienta pentru ca preotii spre sa-si poata indeplini acolo slujba. In prima despartitura erau trei obiecte de mobila: masa pentru punerea inainte a painilor, sfesnicul si altarul tamaierii. Intrand in cladire prin partea din fata, care era spre rasarit, in spatele incaperii se putea vedea altarul tamaierii. La dreapta era masa pentru punerea inainte a painii, iar la stanga sfesnicul. Pe masa erau turtele de paine si recipientele pentru jertfele de bautura. Mai erau si farfurii, linguri si cesti folosite la slujba. Sfesnicul era din aur curat, cupele sau lampile lui erau facute asemenea migdalele. Obiectul cel mai important din aceasta incapere era altarul tamaierii. Acesta era inalt aproximativ de 88,9 cm si in partea de sus patrat cu latura de aproximativ 44,45 cm. El era acoperit cu aur, iar la partea de sus avea o coroana de aur de jur imprejur. Pe acest altar preotul punea vasul cu carbuni aprinsi luati de pe altarul arderilor de tot si ardea tamaia. Cand punea tamaia pe carbuni, fumul se inalta si, deoarece perdeaua nu ajungea pana la varful cladirii, tamaia nu umplea numai prima despartitura, ci patrundea si in a doua. In felul acesta, desi altarul era in Sfanta, el slujea si pentru Sfanta Sfintelor. In a doua despartitura era numai chivotul, o lada lunga de aproximativ 99,5 cm si lata si inalta de aproximativ 66 cm. Capacul chivotului era numit tronul harului, pe care se facea ispasirea in Ziua de Ispasire. De jur imprejurul tronului harului era o coroana de aur asemanatoare cu aceea de pe altarul tamaierii. Inauntrul chivotului era Legea scrisa pe doua table de piatra cu insusi degetul lui Dumnezeu. Deasupra tronului harului erau doi heruvimi din aur. Aici Dumnezeu vorbea cu poporul Sau (Exod 25,22). In curte, afara din cort, era ligheanul, un bazin mare din bronz, avand apa pentru scaldat. In acest lighean preotii trebuiau sa-si spele mainile si picioarele inainte de a intra in Sanctuar sau de a incepe slujba (Exod 30,17-21; 38,8). In curte, la rasarit de lighean, mai era altarul arderilor de tot, care slujea celui mai important scop pentru toate jertfele. Altarul avea o inaltime de aproximativ 1,33 m care avea nevoie de o bordura de jur imprejur, pe care preotul putea sa stea cand slujea la altar. Aceasta mai facea ca poporul sa-l vada cand slujea la altar. Partea de sus a altarului era un patrat cu latura de 2,22 m. Era facut din lemn acoperit cu arama. Mai tarziu, altarul acesta a fost mult marit spre a corespunde marelui numar de inchinatori. Pe acest altar erau arse jertfele. De aici si numele lui de altarul pentru arderile de tot. Tot aici era arsa si grasimea jertfelor, precum si anumite parti ale altor jertfe. La cele patru colturi ale altarului erau niste iesituri asemenea unor coarne cunoscute sub numele de ,,coarnele altarului”. La anumite jertfe, preotii atingeau coarnele altarului cu sange. La altele, sangele era stropit de jur imprejurul altarului. Restul de sange care nu era folosit la slujba era varsat pe pamant la piciorul altarului.Comentariile lui Ellen G. White 2 MH 437 7,8 PP 355 8, 10 GC 419 13,14 4T 124 14 GC 419 15 PP 355 16 GC 419; PP 355 17 GC 428; MH 437 19 GC 419; PP 355 21 GC 658; PP 356 21,22 EW 178; GC 419; PP 355 22 GC 485 29-34 GC 400 |
Seek to any passage:
Search the text:
Special note for ANDROID SmartPhones
I recommend to download PhoneMe emulator for Android from here.
Especially I recommend phoneME Advanced - Foundation Profile + MIDP High Resolution b168 rev20547 from here, or from here.
Then you have to build your application, to transfer the .jar and .jad files on your mobile phone and run using this nice emulator.
1. Install a Zip Utility from Android Market.
2. Install a File Manager from Android Market.
3. Download and install PhoneMe, as mentioned above.
4. Build your application by using Download Multilingual Service or Dynamic Download (zip).
5. Copy the zip file into your Android Phone and unzip the content in a folder, and then write down the path to the unzipped files and the name of the .jad file.
6. Launch PhoneMe from your smartphone.
7. Inside PhoneMe, write to the main window the path and the name to the .jad file, above mentioned. Will look something like: file:///mnt/sd/download/BiblePhone.jad and then press enter.
8. The application will be installed, and next a hyperlink will be available below the above mentioned textbox. On this way you can install as many of MIDP application you like on your Android Phone.
How to install the application in Java Mobile enabled phones
It is possible now to have the Holy Scriptures on your mobile phone and to read
it wherever you are due to the Mobile Information Device Profile (MIDP)
technology in 1.0 and 2.0 versions, developed for Java applications.
A good advice is to try in the beginning the MIDP 1.0 / 128 Kbytes version, and
progressively to advance to MIDP 2.0 and larger volumes (512 Kbytes or more).
The application is available for MIDP 2.0, MIDP 1.0. You have only to select one
table on the field MIDP2.0 or MIDP1.0, according to the desired Bible version.
Then, you shall make a click on the JAR (Java Archive) file in order to obtain
the software to be installed on your mobile phone.
I recommend you to start with STARTER(MIDP1.0old) edition, then to continue with
INTERMEDIATE(MIDP1.0), and in the end, if the mobile phone supports this thing,
to try to install the ADVANCED (MIDP2.0) edition. Also, start with 128 kbytes
volumes, continue with 512 kbytes, and at the end try the version in one file.
There are cases where the mobile phone requires so called JAD (Java Descriptor)
files. These JAD files has to be
uploaded, on this case, together with the desired JAR files(s).
There are different methods to download the applications in your mobile phone as
follows:
1. Directly from Internet by using a WAP or GPRS connection
2. By using the infrared port of the mobile phone
3. By wireless Bluetooth access to the mobile phone
4. By cable link between PC ad mobile phone
5. If none from the above cases are valid
Next, we shall examine each case in order to have a successfully installation of
the software.
1. Directly from Internet by using a WAP or GPRS connection
If your have Internet access on your mobile phone (e.g. WAP or GPRS), it is
enough to access
https://biblephone.intercer.net/wap/ from the browser of the mobile phone,
and to access the desired Bible version, and then to make an option about
MIDP1.0 or MIDP2.0, and finally to select the desired module (e.g. one or more).
After the last selection, the desired version will be downloaded on your mobile
phone.
Many phones have only this option for installing JAVA appplications.
2. By using the infrared port of the mobile phone
Sometimes there is a need for a special uploader software for specific mobile
phones.
If you don't have access to Internet directly from your mobile phone, then you
shall have to pass to this step requiring to have infrared ports on your mobile
phone and on the computer.
a. On this case, you will download the application by using the computer from
the Internet (i.e. JAR files).
b. Once the application is downloaded (preferable on the desktop) you will have
to activate the infrared port on the mobile phone and align it with the infrared
port of the computer (preferable laptop).
c. Then a window will appear asking what file you want to send to the mobile
phone. Next, you will select the downloaded JAR file, and after OK, the mobile
phone will ask you if you want to load that file. You say YES and the
application will be downloaded on your mobile phone.
d. Probably, you will be asked by the mobile phone where you want to save it (e.g.
on the games or applications directories). After you made this selection, the
file will be ready to be loaded for run.
The displaying preference can be set inside the application in order to have
larger fonts, full screen display etc.
3. By wireless Bluetooth access to the mobile phone
Sometimes there is a need for a special uploader software for specific mobile
phones.
This situation is similar with the infrared case. You have only to activate
Bluetooth access on your mobile phone (check if exists) and on the computer (check
if exists).
4. By cable link between PC ad mobile phone
Sometimes there is a need for a special uploader software for specific
mobile phones.
On this case the steps are as follows:
a. On this case, you will download the application by using the computer from
the Internet (i.e. JAR files).
b. Once the application is downloaded (preferable on the desktop) you will have
to set up the wired connection between the mobile phone and the computer. Next,
you will start the synchronization / data transfer application and download the
JAR file in your mobile phone. Surely, you will have to consult the CD of your
mobile phone.
c. By this application you shall transfer into your mobile phone the JAR file in
the games or applications directories. Next, you will have to select for run the
JAR desired file.
5. If none from the above cases are valid
On this unhappy case, I recommend you to find a friend with a laptop having
infrared / Bluetooth capabilities, or to buy a data link cable, or to change
your current model of mobile phone.
Unfortunately, some models of mobile phones require only WAP/GPRS in order to
download and run Java applications.
Sometimes there is a need for a special uploader software for specific mobile
phones. Therefore check the documentation of them and also the page for specific
models.
Why so many versions? Simple, because not all the mobile phones support the
Bible in one file with MIDP 2.0 (the most advanced for the time being).
Multilingual Online Ebooks
It is possible now to have the inspirational ebooks on your browser and to read it allowing you to make comparisons between different translations or versions for a specific language. This occasion is unique, and you have only to browse to the desired author and book.
Select another version: