16:32 Ispăşirea să fie făcută de preotul care a primit ungerea şi care a fost închinat în slujba Domnului, ca să urmeze tatălui său în slujba preoţiei; să se îmbrace cu veşmintele de in, cu veşmintele sfinţite. Care a fost închinat. Preoţia şi slujba trebuiau să continue după moartea lui Aaron. Atunci trebuia să fie uns un alt preot şi consacrat pentru slujba preoţească, ca să-şi pună veşmintele de in şi să conducă slujba. Leviticul 16 este unul dintre marile capitole ale Bibliei. În el, Planul Mântuirii este descoperit minunat şi impresionant, iar unele dintre lucrurile adânci ale lui Dumnezeu sunt descoperite în cele 34 de versete. Adâncimea înţelesului descoperit în ceremoniile descrise proclamă un autor divin. Mintea este exercitată la maximum în încercarea de a înţelege învăţăturile lui. Note suplimentare pentru capitolul 16 Pentru a putea înţelege serviciile Zilei de Ispăşire sunt necesare unele cunoştinţe despre clădirea în care avea loc ritualul de la Sanctuar, precum şi oarecare cunoştinţe despre lucrurile din jurul lui. Pentru o descriere generală, vezi comentariul pentru Exod 26,1, iar pentru o descriere amănunţită, comentariile pentru Exod 25 la 40. Cortul Întâlnirii care a fost construit la început de Moise era un cort cu pereţii laterali de lemn (vezi Exod 26,15-26). Acoperişul consta din patru straturi de material, cel interior fiind din fire fine de in, celelalte din diferite feluri de piei (vezi Exod 26,1-14). Cortul însuşi era aproximativ de 13,34 m lungime şi aproximativ de 4,45 m lăţime, cu o îngrădire exterioară numită curte, aproximativ de 52,4 m lungime şi aproximativ de 26,2 m lăţime (vezi comentariul pentru Exod 27,9-18). Clădirea era împărţită în două despărţituri, prima şi cea mai mare numită Sfânta, şi a doua Sfânta Sfintelor. Cele două despărţituri erau separate de o perdea bogată. Deoarece clădirea nu avea ferestre, lumina era obţinută artificial prin sfeşnicul cu şapte braţe din prima despărţitură, care dădea lumină suficientă pentru ca preoţii spre să-şi poată îndeplini acolo slujba. În prima despărţitură erau trei obiecte de mobilă: masa pentru punerea înainte a pâinilor, sfeşnicul şi altarul tămâierii. Intrând în clădire prin partea din faţă, care era spre răsărit, în spatele încăperii se putea vedea altarul tămâierii. La dreapta era masa pentru punerea înainte a pâinii, iar la stânga sfeşnicul. Pe masă erau turtele de pâine şi recipientele pentru jertfele de băutură. Mai erau şi farfurii, linguri şi ceşti folosite la slujbă. Sfeşnicul era din aur curat, cupele sau lămpile lui erau făcute asemenea migdalele. Obiectul cel mai important din această încăpere era altarul tămâierii. Acesta era înalt aproximativ de 88,9 cm şi în partea de sus pătrat cu latura de aproximativ 44,45 cm. El era acoperit cu aur, iar la partea de sus avea o coroană de aur de jur împrejur. Pe acest altar preotul punea vasul cu cărbuni aprinşi luaţi de pe altarul arderilor de tot şi ardea tămâia. Când punea tămâia pe cărbuni, fumul se înălţa şi, deoarece perdeaua nu ajungea până la vârful clădirii, tămâia nu umplea numai prima despărţitură, ci pătrundea şi în a doua. În felul acesta, deşi altarul era în Sfânta, el slujea şi pentru Sfânta Sfintelor. În a doua despărţitură era numai chivotul, o ladă lungă de aproximativ 99,5 cm şi lată şi înaltă de aproximativ 66 cm. Capacul chivotului era numit tronul harului, pe care se făcea ispăşirea în Ziua de Ispăşire. De jur împrejurul tronului harului era o coroană de aur asemănătoare cu aceea de pe altarul tămâierii. Înăuntrul chivotului era Legea scrisă pe două table de piatră cu însuşi degetul lui Dumnezeu. Deasupra tronului harului erau doi heruvimi din aur. Aici Dumnezeu vorbea cu poporul Său (Exod 25,22). În curte, afară din cort, era ligheanul, un bazin mare din bronz, având apă pentru scăldat. În acest lighean preoţii trebuiau să-şi spele mâinile şi picioarele înainte de a intra în Sanctuar sau de a începe slujba (Exod 30,17-21; 38,8). În curte, la răsărit de lighean, mai era altarul arderilor de tot, care slujea celui mai important scop pentru toate jertfele. Altarul avea o înălţime de aproximativ 1,33 m care avea nevoie de o bordură de jur împrejur, pe care preotul putea să stea când slujea la altar. Aceasta mai făcea ca poporul să-l vadă când slujea la altar. Partea de sus a altarului era un pătrat cu latura de 2,22 m. Era făcut din lemn acoperit cu aramă. Mai târziu, altarul acesta a fost mult mărit spre a corespunde marelui număr de închinători. Pe acest altar erau arse jertfele. De aici şi numele lui de altarul pentru arderile de tot. Tot aici era arsă şi grăsimea jertfelor, precum şi anumite părţi ale altor jertfe. La cele patru colţuri ale altarului erau nişte ieşituri asemenea unor coarne cunoscute sub numele de ,,coarnele altarului”. La anumite jertfe, preoţii atingeau coarnele altarului cu sânge. La altele, sângele era stropit de jur împrejurul altarului. Restul de sânge care nu era folosit la slujbă era vărsat pe pământ la piciorul altarului.Comentariile lui Ellen G. White 2 MH 437 7,8 PP 355 8, 10 GC 419 13,14 4T 124 14 GC 419 15 PP 355 16 GC 419; PP 355 17 GC 428; MH 437 19 GC 419; PP 355 21 GC 658; PP 356 21,22 EW 178; GC 419; PP 355 22 GC 485 29-34 GC 400 |
Seek to any passage:
Search the text:
Special note for ANDROID SmartPhones
I recommend to download PhoneMe emulator for Android from here.
Especially I recommend phoneME Advanced - Foundation Profile + MIDP High Resolution b168 rev20547 from here, or from here.
Then you have to build your application, to transfer the .jar and .jad files on your mobile phone and run using this nice emulator.
1. Install a Zip Utility from Android Market.
2. Install a File Manager from Android Market.
3. Download and install PhoneMe, as mentioned above.
4. Build your application by using Download Multilingual Service or Dynamic Download (zip).
5. Copy the zip file into your Android Phone and unzip the content in a folder, and then write down the path to the unzipped files and the name of the .jad file.
6. Launch PhoneMe from your smartphone.
7. Inside PhoneMe, write to the main window the path and the name to the .jad file, above mentioned. Will look something like: file:///mnt/sd/download/BiblePhone.jad and then press enter.
8. The application will be installed, and next a hyperlink will be available below the above mentioned textbox. On this way you can install as many of MIDP application you like on your Android Phone.
How to install the application in Java Mobile enabled phones
It is possible now to have the Holy Scriptures on your mobile phone and to read
it wherever you are due to the Mobile Information Device Profile (MIDP)
technology in 1.0 and 2.0 versions, developed for Java applications.
A good advice is to try in the beginning the MIDP 1.0 / 128 Kbytes version, and
progressively to advance to MIDP 2.0 and larger volumes (512 Kbytes or more).
The application is available for MIDP 2.0, MIDP 1.0. You have only to select one
table on the field MIDP2.0 or MIDP1.0, according to the desired Bible version.
Then, you shall make a click on the JAR (Java Archive) file in order to obtain
the software to be installed on your mobile phone.
I recommend you to start with STARTER(MIDP1.0old) edition, then to continue with
INTERMEDIATE(MIDP1.0), and in the end, if the mobile phone supports this thing,
to try to install the ADVANCED (MIDP2.0) edition. Also, start with 128 kbytes
volumes, continue with 512 kbytes, and at the end try the version in one file.
There are cases where the mobile phone requires so called JAD (Java Descriptor)
files. These JAD files has to be
uploaded, on this case, together with the desired JAR files(s).
There are different methods to download the applications in your mobile phone as
follows:
1. Directly from Internet by using a WAP or GPRS connection
2. By using the infrared port of the mobile phone
3. By wireless Bluetooth access to the mobile phone
4. By cable link between PC ad mobile phone
5. If none from the above cases are valid
Next, we shall examine each case in order to have a successfully installation of
the software.
1. Directly from Internet by using a WAP or GPRS connection
If your have Internet access on your mobile phone (e.g. WAP or GPRS), it is
enough to access
https://biblephone.intercer.net/wap/ from the browser of the mobile phone,
and to access the desired Bible version, and then to make an option about
MIDP1.0 or MIDP2.0, and finally to select the desired module (e.g. one or more).
After the last selection, the desired version will be downloaded on your mobile
phone.
Many phones have only this option for installing JAVA appplications.
2. By using the infrared port of the mobile phone
Sometimes there is a need for a special uploader software for specific mobile
phones.
If you don't have access to Internet directly from your mobile phone, then you
shall have to pass to this step requiring to have infrared ports on your mobile
phone and on the computer.
a. On this case, you will download the application by using the computer from
the Internet (i.e. JAR files).
b. Once the application is downloaded (preferable on the desktop) you will have
to activate the infrared port on the mobile phone and align it with the infrared
port of the computer (preferable laptop).
c. Then a window will appear asking what file you want to send to the mobile
phone. Next, you will select the downloaded JAR file, and after OK, the mobile
phone will ask you if you want to load that file. You say YES and the
application will be downloaded on your mobile phone.
d. Probably, you will be asked by the mobile phone where you want to save it (e.g.
on the games or applications directories). After you made this selection, the
file will be ready to be loaded for run.
The displaying preference can be set inside the application in order to have
larger fonts, full screen display etc.
3. By wireless Bluetooth access to the mobile phone
Sometimes there is a need for a special uploader software for specific mobile
phones.
This situation is similar with the infrared case. You have only to activate
Bluetooth access on your mobile phone (check if exists) and on the computer (check
if exists).
4. By cable link between PC ad mobile phone
Sometimes there is a need for a special uploader software for specific
mobile phones.
On this case the steps are as follows:
a. On this case, you will download the application by using the computer from
the Internet (i.e. JAR files).
b. Once the application is downloaded (preferable on the desktop) you will have
to set up the wired connection between the mobile phone and the computer. Next,
you will start the synchronization / data transfer application and download the
JAR file in your mobile phone. Surely, you will have to consult the CD of your
mobile phone.
c. By this application you shall transfer into your mobile phone the JAR file in
the games or applications directories. Next, you will have to select for run the
JAR desired file.
5. If none from the above cases are valid
On this unhappy case, I recommend you to find a friend with a laptop having
infrared / Bluetooth capabilities, or to buy a data link cable, or to change
your current model of mobile phone.
Unfortunately, some models of mobile phones require only WAP/GPRS in order to
download and run Java applications.
Sometimes there is a need for a special uploader software for specific mobile
phones. Therefore check the documentation of them and also the page for specific
models.
Why so many versions? Simple, because not all the mobile phones support the
Bible in one file with MIDP 2.0 (the most advanced for the time being).
Multilingual Online Ebooks
It is possible now to have the inspirational ebooks on your browser and to read it allowing you to make comparisons between different translations or versions for a specific language. This occasion is unique, and you have only to browse to the desired author and book.