13:1 Saul era în vârstă de treizeci de ani, când a ajuns împărat, şi a domnit doi ani peste Israel. Saul... a domnit. (engl. ,,Saul a domnit un an”). Înţelesul acestui text al Scripturii nu e clar, aşa cum sunt de acord toţi traducătorii şi comentatorii. O traducere literală a textului ebraic, aşa cum îl avem astăzi, se citeşte: ,,Saul în vârstă de an(i) când a început să domnească şi a domnit doi ani peste Israel” (despre ,,an(i) vârstă” vezi vol. 1 pag. 181, şi cele despre Geneza 5,32). Încă de pe vremea celei dintâi traduceri a Bibliei, fără încetare textul acesta a pus în încurcătură pe traducători. Ediţiile mai timpurii ale LXX au evitat dificultatea prin omiterea în întregime a versetului. Targumurile l-au parafrazat spre a se citi: ,,Saul a fost tot aşa de inocent ca un copil de un an când a început să domnească”. Siriaca îl redă: ,,Când Saul domnise unul sau doi ani”. Ca şi traducerile precedente ale textului JKV este o parafrazare care redă, nu textul ebraic, aşa cum îl avem astăzi, ci ceea ce au crezut traducătorii că ar fi fost textul original ebraic. Traducerea RSV presupune că sunt două omisiuni: ,,Saul era în vârstă de... ani când a început să domnească; şi el a domnit... şi doi ani peste Israel”. Unii comentatori sunt de acord că aici, fără îndoială, este un caz unde a avut loc o omisiune în procesul de copiere, deşi nimeni nu poate spune pe ce vreme, în transmiterea textului, a putut avea loc omisiunea (vezi vol. 1 pag. 15). Dacă textul ebraic existent este rezultatul unei omisiuni, ne găsim în faţa unei dovezi despre grija şi conştiinciozitatea copiştilor de mai târziu în lucrarea lor de producere de noi manuscrise, pentru că ei n-au contrafăcut textul însuşi, ci l-au lăsat aşa cum l-au găsit, chiar dacă înţelesul lui este obscur. Se câştigă puţin prin metoda presupunerii, dar se poate încerca o explicaţie. Forma declaraţiei în discuţie corespunde exact cu aceea a formulei folosită de obicei de scriitorii Biblie pentru precizarea vârstei împăratului la începutul domniei şi durata acesteia. Formula corespunzătoare pentru David apare în 2Sa 5,4 (vezi şi 2 Regi 32,2; 24,8; 8,18 etc.). Dacă ar fi fost făcute într-un text paralel omisiuni asemănătoare cu acelea din 1 Samuel 13,1, un text ca cel din 1 Regi 21,1 s-ar citit: ,,Manase era în vârstă de.... ani când a început să domnească şi a domnit.... şi cinci ani în Ierusalim”. În construcţia de bază, cele două texte sunt identice. Introducerea unui număr pentru vârsta lui Saul când ajunge împărat şi un altul pentru lungimea domniei lui ar face declaraţia paralelă cu declaraţiile despre David şi alţi împăraţi. În textul original expresia ,,....şi doi” poate fi citită ,,patruzeci” (vezi Fapte 13,21). Textul ebraic din 1 Samuel 13,1, aşa cum se află acum, lasă să se înţeleagă că, la origine, el a constituit o declaraţie despre vârsta lui Saul şi lungimea domniei lui. Dacă nu este aşa, atunci Saul este singurul împărat evreu despre care Vechiul Testament nu face o astfel de declaraţie. În conformitate cu o altă explicaţie, 1 Samuel 13,1 s-ar citi: ,,Saul a domnit un an; şi el a domnit doi ani peste Israel”. Adică el împlinise primul an al domniei lui (vezi pag. 138) şi era în al doilea an când au avut loc evenimentele din acest capitol. Totuşi, trebuie admis faptul că a construi textul ebraic din 1 Samuel 13,1 ca să arată că evenimentele din cap. 13 au avut loc în al doilea an al lui Saul este nenatural (forţat) şi constituie o construcţie fără paralelă exactă în raportul Bibliei despre împăraţi. Textul poate fi înţeles în mod rezonabil ca însemnând că Saul a făcut o încercare de a supune pe filisteni în al doilea an al lui, deşi prima lovitură reală – aceea a lui Ionatan, raportată aici, a venit cândva, mai târziu. Înţeles în felul acesta, există armonie cu traducerea şi prima interpretare menţionată aici pentru 1 Samuel 13,1. Dacă se conchide că PP 616 pare să dea lămuriri pe baza interpretării de către KJV a acestui verset, s-ar putea arăta că declaraţia în sine poate fi luată ca referindu-se la prima încercare. Dar nu are importanţă cum este tradus sau interpretat acest pasaj, noi suntem lăsaţi în încurcătură in ceea ce priveşte redarea originală a textului. Totuşi, în cazul acesta ca şi în alte cazuri de texte dificile şi obscure, nu este vorba de nici o problemă de doctrină şi, deci, de mântuire a noastră. |
Seek to any passage:
Search the text:
Special note for ANDROID SmartPhones
I recommend to download PhoneMe emulator for Android from here.
Especially I recommend phoneME Advanced - Foundation Profile + MIDP High Resolution b168 rev20547 from here, or from here.
Then you have to build your application, to transfer the .jar and .jad files on your mobile phone and run using this nice emulator.
1. Install a Zip Utility from Android Market.
2. Install a File Manager from Android Market.
3. Download and install PhoneMe, as mentioned above.
4. Build your application by using Download Multilingual Service or Dynamic Download (zip).
5. Copy the zip file into your Android Phone and unzip the content in a folder, and then write down the path to the unzipped files and the name of the .jad file.
6. Launch PhoneMe from your smartphone.
7. Inside PhoneMe, write to the main window the path and the name to the .jad file, above mentioned. Will look something like: file:///mnt/sd/download/BiblePhone.jad and then press enter.
8. The application will be installed, and next a hyperlink will be available below the above mentioned textbox. On this way you can install as many of MIDP application you like on your Android Phone.
How to install the application in Java Mobile enabled phones
It is possible now to have the Holy Scriptures on your mobile phone and to read
it wherever you are due to the Mobile Information Device Profile (MIDP)
technology in 1.0 and 2.0 versions, developed for Java applications.
A good advice is to try in the beginning the MIDP 1.0 / 128 Kbytes version, and
progressively to advance to MIDP 2.0 and larger volumes (512 Kbytes or more).
The application is available for MIDP 2.0, MIDP 1.0. You have only to select one
table on the field MIDP2.0 or MIDP1.0, according to the desired Bible version.
Then, you shall make a click on the JAR (Java Archive) file in order to obtain
the software to be installed on your mobile phone.
I recommend you to start with STARTER(MIDP1.0old) edition, then to continue with
INTERMEDIATE(MIDP1.0), and in the end, if the mobile phone supports this thing,
to try to install the ADVANCED (MIDP2.0) edition. Also, start with 128 kbytes
volumes, continue with 512 kbytes, and at the end try the version in one file.
There are cases where the mobile phone requires so called JAD (Java Descriptor)
files. These JAD files has to be
uploaded, on this case, together with the desired JAR files(s).
There are different methods to download the applications in your mobile phone as
follows:
1. Directly from Internet by using a WAP or GPRS connection
2. By using the infrared port of the mobile phone
3. By wireless Bluetooth access to the mobile phone
4. By cable link between PC ad mobile phone
5. If none from the above cases are valid
Next, we shall examine each case in order to have a successfully installation of
the software.
1. Directly from Internet by using a WAP or GPRS connection
If your have Internet access on your mobile phone (e.g. WAP or GPRS), it is
enough to access
https://biblephone.intercer.net/wap/ from the browser of the mobile phone,
and to access the desired Bible version, and then to make an option about
MIDP1.0 or MIDP2.0, and finally to select the desired module (e.g. one or more).
After the last selection, the desired version will be downloaded on your mobile
phone.
Many phones have only this option for installing JAVA appplications.
2. By using the infrared port of the mobile phone
Sometimes there is a need for a special uploader software for specific mobile
phones.
If you don't have access to Internet directly from your mobile phone, then you
shall have to pass to this step requiring to have infrared ports on your mobile
phone and on the computer.
a. On this case, you will download the application by using the computer from
the Internet (i.e. JAR files).
b. Once the application is downloaded (preferable on the desktop) you will have
to activate the infrared port on the mobile phone and align it with the infrared
port of the computer (preferable laptop).
c. Then a window will appear asking what file you want to send to the mobile
phone. Next, you will select the downloaded JAR file, and after OK, the mobile
phone will ask you if you want to load that file. You say YES and the
application will be downloaded on your mobile phone.
d. Probably, you will be asked by the mobile phone where you want to save it (e.g.
on the games or applications directories). After you made this selection, the
file will be ready to be loaded for run.
The displaying preference can be set inside the application in order to have
larger fonts, full screen display etc.
3. By wireless Bluetooth access to the mobile phone
Sometimes there is a need for a special uploader software for specific mobile
phones.
This situation is similar with the infrared case. You have only to activate
Bluetooth access on your mobile phone (check if exists) and on the computer (check
if exists).
4. By cable link between PC ad mobile phone
Sometimes there is a need for a special uploader software for specific
mobile phones.
On this case the steps are as follows:
a. On this case, you will download the application by using the computer from
the Internet (i.e. JAR files).
b. Once the application is downloaded (preferable on the desktop) you will have
to set up the wired connection between the mobile phone and the computer. Next,
you will start the synchronization / data transfer application and download the
JAR file in your mobile phone. Surely, you will have to consult the CD of your
mobile phone.
c. By this application you shall transfer into your mobile phone the JAR file in
the games or applications directories. Next, you will have to select for run the
JAR desired file.
5. If none from the above cases are valid
On this unhappy case, I recommend you to find a friend with a laptop having
infrared / Bluetooth capabilities, or to buy a data link cable, or to change
your current model of mobile phone.
Unfortunately, some models of mobile phones require only WAP/GPRS in order to
download and run Java applications.
Sometimes there is a need for a special uploader software for specific mobile
phones. Therefore check the documentation of them and also the page for specific
models.
Why so many versions? Simple, because not all the mobile phones support the
Bible in one file with MIDP 2.0 (the most advanced for the time being).
Multilingual Online Ebooks
It is possible now to have the inspirational ebooks on your browser and to read it allowing you to make comparisons between different translations or versions for a specific language. This occasion is unique, and you have only to browse to the desired author and book.