1:1 Dupa moartea lui Moise, robul Domnului, Domnul a zis lui Iosua, fiul lui Nun, slujitorul lui Moise: Dupa. Sau ,,si s-a intamplat”, ca in Numeri 7,1 etc. ,,Si”, cuvantul de inceput in ebraica, inseamna ca istorisirea lui Iosua este o continuare a cartii Deuteronom. Aceasta expresie sugereaza ca Iosua este autorul ultimului capitol din Deuteronom; aici el reia istoria si continua cu raportul propriilor experiente. Timpul la care se refera aici trebuie sa fi fost dupa cele 30 de zile de plans amintite in Deuteronom 34,8. Robul. Adesea, cuvantul tradus astfel inseamna o persoana intru totul supusa stapanului sau. Aici, el arata pe cineva in totalitate supus lui Dumnezeu si ascultator de poruncile Lui. De obicei, asa vorbea Pavel despre sine insusi (Romani 1,1 etc.). Un ,,slujitor al Domnului” este in robia lui Hristos, care l-a rascumparat din robia pacatului. Asa a fost si cu Moise. Iosua, care slujise ca prim-ministru pentru Moise, era confirmat acum ca lider al lui Israel. Credinciosia lui modesta, nepretentioasa si statornica era dovada ca este potrivit sa-l urmeze lui Moise. Iosua se nascuse cu cativa ani inainte de fuga lui Moise din Egipt si exilul din pustia Medianului. Atunci se credea ca Moise avea sa ajunga vreodata eliberatorul natiunii. Dar Providenta prevede si pregateste cu mult timp inainte pentru raspunde nevoilor poporului Sau. Dumnezeu pastreaza in rezerva unelte si puteri de care nu ne dam seama pana nu vine vremea. De exemplu, cum avea un profesor universitar necunoscut sa clatine Europa intreaga si sa-l faca pe papa sa tremure pe tronul sau. Nimic nu parea mai imposibil, totusi Frederic, print de Saxonia, a fost pus de Dumnezeu pe tronul lui, gata sa ajute cand avea sa vina timpul. Si cu mult mai inainte ca Luther sa se fi nascut, Providenta a facut sa apara tiparul, care avea sa devina artileria cea mai nimicitoare folosita de Luther. Planurile lui Dumnezeu sunt desavarsite, si vine ceasul pentru implinirea oricaruia dintre scopurile Lui, si, o data cu el, si omul pentru acel ceas. Niciodata planurile lui Dumnezeu nu depind de un singur om. Cand moare un Moise, Dumnezeu are pregatit un Iosua. Moise a fost cel mai calificat sa stea in fata lui Faraon, iar Iosua sa stea in fata canaanitilor. Alegerea unui om de catre Dumnezeu este facuta in functie de patru factori: 1. 1. Temperamentul si aptitudinile lui. Iosua avea o insusire naturala pentru problemele militare. El era indraznet si hotarat (Numeri 14,6-9) si avea o puternica influenta personala (Iosua 24,31). 2. Educatia lui anterioara. Iosua slujise deja 40 de ani ca lider cu raspundere. (Exod 17,9.10, Numeri 13,2.3.8). Educatia si experienta sunt esentiale. 3. Reputatia lui. El si Caleb au stat singuri pentru o cauza nepopulara. 2. 4. Sarcina pe care o are de indeplinit. Pentru a-i deposeda pe canaaniti era nevoie de un ostas. Omul si nevoia trebuie sa corespunda. Slujitorul lui Moise. In ebraica, ca si in engleza, termenul de ,,slujitor" nu este folosit exclusiv despre serviciul religios. El arata un insotitor voluntar, cineva care se afla la dispozitia altuia, in contrast cu un ,,serv” Care pentru un motiv sau altul se afla sub obligatie. |
Seek to any passage:
Search the text:
Special note for ANDROID SmartPhones
I recommend to download PhoneMe emulator for Android from here.
Especially I recommend phoneME Advanced - Foundation Profile + MIDP High Resolution b168 rev20547 from here, or from here.
Then you have to build your application, to transfer the .jar and .jad files on your mobile phone and run using this nice emulator.
1. Install a Zip Utility from Android Market.
2. Install a File Manager from Android Market.
3. Download and install PhoneMe, as mentioned above.
4. Build your application by using Download Multilingual Service or Dynamic Download (zip).
5. Copy the zip file into your Android Phone and unzip the content in a folder, and then write down the path to the unzipped files and the name of the .jad file.
6. Launch PhoneMe from your smartphone.
7. Inside PhoneMe, write to the main window the path and the name to the .jad file, above mentioned. Will look something like: file:///mnt/sd/download/BiblePhone.jad and then press enter.
8. The application will be installed, and next a hyperlink will be available below the above mentioned textbox. On this way you can install as many of MIDP application you like on your Android Phone.
How to install the application in Java Mobile enabled phones
It is possible now to have the Holy Scriptures on your mobile phone and to read
it wherever you are due to the Mobile Information Device Profile (MIDP)
technology in 1.0 and 2.0 versions, developed for Java applications.
A good advice is to try in the beginning the MIDP 1.0 / 128 Kbytes version, and
progressively to advance to MIDP 2.0 and larger volumes (512 Kbytes or more).
The application is available for MIDP 2.0, MIDP 1.0. You have only to select one
table on the field MIDP2.0 or MIDP1.0, according to the desired Bible version.
Then, you shall make a click on the JAR (Java Archive) file in order to obtain
the software to be installed on your mobile phone.
I recommend you to start with STARTER(MIDP1.0old) edition, then to continue with
INTERMEDIATE(MIDP1.0), and in the end, if the mobile phone supports this thing,
to try to install the ADVANCED (MIDP2.0) edition. Also, start with 128 kbytes
volumes, continue with 512 kbytes, and at the end try the version in one file.
There are cases where the mobile phone requires so called JAD (Java Descriptor)
files. These JAD files has to be
uploaded, on this case, together with the desired JAR files(s).
There are different methods to download the applications in your mobile phone as
follows:
1. Directly from Internet by using a WAP or GPRS connection
2. By using the infrared port of the mobile phone
3. By wireless Bluetooth access to the mobile phone
4. By cable link between PC ad mobile phone
5. If none from the above cases are valid
Next, we shall examine each case in order to have a successfully installation of
the software.
1. Directly from Internet by using a WAP or GPRS connection
If your have Internet access on your mobile phone (e.g. WAP or GPRS), it is
enough to access
https://biblephone.intercer.net/wap/ from the browser of the mobile phone,
and to access the desired Bible version, and then to make an option about
MIDP1.0 or MIDP2.0, and finally to select the desired module (e.g. one or more).
After the last selection, the desired version will be downloaded on your mobile
phone.
Many phones have only this option for installing JAVA appplications.
2. By using the infrared port of the mobile phone
Sometimes there is a need for a special uploader software for specific mobile
phones.
If you don't have access to Internet directly from your mobile phone, then you
shall have to pass to this step requiring to have infrared ports on your mobile
phone and on the computer.
a. On this case, you will download the application by using the computer from
the Internet (i.e. JAR files).
b. Once the application is downloaded (preferable on the desktop) you will have
to activate the infrared port on the mobile phone and align it with the infrared
port of the computer (preferable laptop).
c. Then a window will appear asking what file you want to send to the mobile
phone. Next, you will select the downloaded JAR file, and after OK, the mobile
phone will ask you if you want to load that file. You say YES and the
application will be downloaded on your mobile phone.
d. Probably, you will be asked by the mobile phone where you want to save it (e.g.
on the games or applications directories). After you made this selection, the
file will be ready to be loaded for run.
The displaying preference can be set inside the application in order to have
larger fonts, full screen display etc.
3. By wireless Bluetooth access to the mobile phone
Sometimes there is a need for a special uploader software for specific mobile
phones.
This situation is similar with the infrared case. You have only to activate
Bluetooth access on your mobile phone (check if exists) and on the computer (check
if exists).
4. By cable link between PC ad mobile phone
Sometimes there is a need for a special uploader software for specific
mobile phones.
On this case the steps are as follows:
a. On this case, you will download the application by using the computer from
the Internet (i.e. JAR files).
b. Once the application is downloaded (preferable on the desktop) you will have
to set up the wired connection between the mobile phone and the computer. Next,
you will start the synchronization / data transfer application and download the
JAR file in your mobile phone. Surely, you will have to consult the CD of your
mobile phone.
c. By this application you shall transfer into your mobile phone the JAR file in
the games or applications directories. Next, you will have to select for run the
JAR desired file.
5. If none from the above cases are valid
On this unhappy case, I recommend you to find a friend with a laptop having
infrared / Bluetooth capabilities, or to buy a data link cable, or to change
your current model of mobile phone.
Unfortunately, some models of mobile phones require only WAP/GPRS in order to
download and run Java applications.
Sometimes there is a need for a special uploader software for specific mobile
phones. Therefore check the documentation of them and also the page for specific
models.
Why so many versions? Simple, because not all the mobile phones support the
Bible in one file with MIDP 2.0 (the most advanced for the time being).
Multilingual Online Ebooks
It is possible now to have the inspirational ebooks on your browser and to read it allowing you to make comparisons between different translations or versions for a specific language. This occasion is unique, and you have only to browse to the desired author and book.